product code: 012133
Tiller RO80T3, 7 HP, 5.00‑8
Recommended for surfaces of 500 sqm5,000 sqm with hard, clay or sandy soil.
Recommended price: 2490.00 RON
* Prices include VAT
■Recommended for surfaces of 500 sqm5,000 sqm with hard, clay or sandy soil.
■With segmentable milling cutters, it can be used both for spring works (unclogged) and for harvesting works (planting potatoes, hoeing corn, potatoes, vines, etc.)
■Can be used with very good results also for transport (requires a trailer with a braking system and the slope should not exceed 20‑30 °).
■Compact, well proportioned, with center of gravity above the milling cutters ensuring good maneuverability during work, stability and low vibration (no hopping).
■Equipped with double air filtration system ensuring a plus in difficult working conditions, compared to models with a single filtration system
■The cast iron transmission housing and the walking tractor’s weight of approx. 105 kg (with mounted milling cutters) help at the work of the land (reduced user fatigue when working with milling cutters).
■3 forward gears, 1 reverse gear
■The handlebar can be adjusted vertically and horizontally and helps to adjust the horns according to the height of the user, respectively to leave no marks on the worked ground.
■Equipped with 5.0‑8 agricultural profile wheels that provide better grip when used for transport compared to standard 4.0‑8 wheels.
■Transport system of milling cutters that helps to move the walking tractor on wheels to the work area with the milling cutters mounted on the transport support.
■Adjustable accessory support, very useful when using the walking tractor when ploughing the soil, allows left‑right adjustment of the coulter and at the same time can give «plough tip».
■Adjustable accessory support, very useful when using the walking tractor when ploughing the soil, allows left‑right adjustment of the coulter and at the same time can give «plough tip».
■The low oil level sensor is a safety measure if the engine has lost the oil from the oil bath, automatically shutting down the machine.
■The segmentable milling cutters have an adjustable width when segmented and can be used for corn hoeing and vine hoeing.
Benefits
■With segmentable milling cutters, it can be used both for spring works (unclogged) and for harvesting works (planting potatoes, hoeing corn, potatoes, vines, etc.)
Technical specifications
| Engine ignition | Induction coil |
| Fuel capacity | 5.0 l |
| Engine oil capacity | <395 g / kW / hour |
| Fuel consumption | 415x380x390 mm |
| Engine dimensions (LxWxH) | 415x380x390 mm |
| Engine air filter | Dual filtration system (wet / dry), for all working conditions. |
| Engine weight | 17 kg |
| Number of engine cylinders | 1 cylinder |
| Engine cooling | Air‑forced cooling |
| Engine lubrication system | Barbotage |
| Engine model | 170F / RO170F |
| Engine type | 4‑stroke, OHV, inclined 25° |
| Maximum engine power | 7 CP |
| Maximum engine torque | 12 Nm |
| Cubic capacity | 212 cc |
| Diameter / Piston stroke | 70 / 54 mm |
| Transmission type | Two transmission belts between motor and reducer, chain in reducer, in oil |
| Transmission oil type | 15W40 |
| Gears | 3 forward, 1 reverse |
| Clutch | Tensioning drive belts |
| Power take‑off | Lateral power take‑off |
| Working width | 560‑830 mm |
| Working depth | 300 mm |
| Handlebar type | Adjustable up / down ‑ left / right |
| Milling cutter type | 3 sections with 4 knives, segmentable |
| Wheel type | Rubber tires, 5.00‑8 |
| With between wheels (exterior) | 62 cm |
| Packed size (LxWxH) | 780x410x780 mm |
| Weight | 90 kg |
Delivery set
■2 x Rubber wheel 5.00‑8 / 40 cm
■1 x Set of two segmentable milling cutters 25‑30 cm, 23 mm, 2 + 1
■1 x Fixed ditcher
■1 x Adjustable support for accessories
■1 x Depth adjustment rod
■2 x Manicot (hexagonal tube) ‑ 023 mm, length 171 mm, 4 holes
