Tiller RO80, 7 HP, 5.00-8

product code: 006590

Tiller RO80, 7 HP, 5.00‑8

Recommended for surfaces of 500 sqm5,000 sqm with hard, clay or sandy soil.

Recommended price: 2290.00 RON

* Prices include VAT

■Recommended for surfaces of 500 sqm5,000 sqm with hard, clay or sandy soil.

■With segmentable milling cutters, it can be used both for spring works (unclogged) and for harvesting works (planting potatoes, hoeing corn, potatoes, vines, etc.)

■Can be used with very good results also for transport (requires a trailer with a braking system and the slope should not exceed 20‑30 °).

■Compact, well proportioned, with center of gravity above the milling cutters ensuring good maneuverability during work, stability and low vibration (no hopping).

■Equipped with double air filtration system ensuring a plus in difficult working conditions, compared to models with a single filtration system

■The cast iron transmission housing and the walking tractor’s weight of approx. 105 kg (with mounted milling cutters) help at the work of the land (reduced user fatigue when working with milling cutters).

■The handlebar can be adjusted vertically and horizontally and helps to adjust the horns according to the height of the user, respectively to leave no marks on the worked ground.

■Equipped with 5.0‑8 agricultural profile wheels that provide better grip when used for transport compared to standard 4.0‑8 wheels.

■Transport system of milling cutters that helps to move the walking tractor on wheels to the work area with the milling cutters mounted on the transport support.

■Adjustable accessory support, very useful when using the walking tractor when ploughing the soil, allows left‑right adjustment of the coulter and at the same time can give «plough tip».

■The low oil level sensor is a safety measure if the engine has lost the oil from the oil bath, automatically shutting down the machine.

■The segmentable milling cutters have an adjustable width when segmented and can be used for corn hoeing and vine hoeing.

Benefits

■With segmentable milling cutters, it can be used both for spring works (unclogged) and for harvesting works (planting potatoes, hoeing corn, potatoes, vines, etc.)

Technical specifications

Engine ignition	Induction coil
Fuel capacity	3.11
Engine oil capacity	0.6 1
Fuel consumption	<395 g / kW / hour
Engine dimensions (LxWxH)	321x376x346 mm
Engine air filter	Semi‑dry (oil‑soaked sponge filter)
Engine weight	16 kg
Number of engine cylinders	1 cylinder
Engine cooling	Air‑forced cooling
Engine lubrication system	Barbotage
Engine model	Series B&S 950
Engine type	4‑stroke, OHV, inclined 25°
Maximum engine power	7 HP
Maximum engine torque	12.9 Nm
Cubic capacity	208 cc
Diameter / Piston stroke	68.3 / 55.9 mm
Transmission type	Two transmission belts between motor and reducer, chain in reducer, in oil
Transmission oil type	15W40
Gears	2 forward, 1 reverse
Clutch	Tensioning drive belts
Power take‑off	No
Working width	560‑830 mm
Working depth	300 mm
Handlebar type	Adjustable up / down ‑ left / right
Milling cutter type	3 sections with 4 knives, segmentable
Wheel type	Rubber tires, 5.00‑8
Packed size (LxWxH)	780x410x780 mm
Weight	85 kg