product code: 030872
Tiller RO75R, 7 HP, 4.00‑8
Recommended for surfaces of 500 sqm5,000 sqm with hard, clay or sandy soil
Recommended price: 1940.00 RON
* Prices include VAT
■Recommended for surfaces of 500 sqm5,000 sqm with hard, clay or sandy soil
■Compact, well proportioned, with center of gravity above the milling cutters ensuring good maneuverability during work, stability and low vibration (no hopping)
■Equipped with double air filtration system ensuring a plus in difficult working conditions, compared to models with a single filtration system
■The duralumin transmission housing and the walking tractor’s weight of approx. 80 kg (with mounted milling cutters) help at the land works
(reduced user fatigue when working with milling cutters)
■The protective plastic straps no longer vibrate while walking, the noise disappears
■Vertically adjustable handlebars help when the user's height requires adjusting the horns
■Equipped with 4.00‑8 agricultural profile wheels that provide better grip when used for transport
■Transport system of milling cutters that helps to move the walking tractor on wheels to the work area with the milling cutters mounted on the transport support.
■The segmentable milling cutters have an adjustable width when segmented and can be used for corn hoeing and vine hoeing. The milling cutters are equipped with knives designed for hard soils, are provided with side protection discs and a sleeve for protecting the drive shaft oil‑sealing rings.
■Resistant wings adjusted to be used for all jobs
■Tool box for the key set
■Front transport wheel
Benefits
- With segmentable milling cutters, it can be used both for spring works (unclogged) and for harvesting works (planting potatoes, hoeing corn, potatoes, vines, etc.)
Technical specifications
| Engine ignition | Induction coil |
| Fuel capacity | 3.6 l |
| Engine oil capacity | 0.6 l |
| Fuel consumption | <395 g / kW / hour |
| Engine dimensions (LxWxH) | 390x320x345 mm |
| Engine air filter | Wet filtration system |
| Engine weight | 16 kg |
| Number of engine cylinders | 1 cylinder |
| Engine cooling | Air‑forced cooling |
| Engine lubrication system | Barbotage |
| Engine model | R210 |
| Engine type | 4‑stroke, OHV, inclined 25° |
| Maximum engine power | 7 HP |
| Maximum engine torque | 12 Nm |
| Cubic capacity | 212 cc |
| Diameter / Piston stroke | 70 / 55 mm |
| Transmission type | Two transmission belts between motor and reducer, chain in reducer, in oil |
| Transmission oil type | 15W40 |
| Gears | 2 forward, 1 reverse |
| Clutch | Tensioning drive belts |
| Power take‑off | No |
| Working width | 560‑830 mm |
| Working depth | 250 mm |
| Handlebar type | Adjustable up / down |
| Milling cutter type | 3 sections with 4 knives, segmentable |
| Wheel type | Rubber tires, 4.00‑8 |
| Packed size (LxWxH) | 830x470x650 mm |
| Weight | 65 kg |
Delivery set
■1 x Set of two milling cutters 25‑30 cm, /23 mm
■2 x Rubber wheel 4.00‑8 / 40 cm
■1 x Fixed support for accessories
■1 x Depth adjustment rod
■2 x Manicot (hexagonal tube) ‑ 023 mm, length 171 mm, 4 holes
