Tiller RO500, 7 HP, 5.00-8

product code: 004957

Tiller RO500, 7 HP, 5.00‑8

Recommended for surfaces of 500 sqm‑5,000 sqm with hard, clay or sandy soil

Recommended price: 2100.00 RON

* Prices include VAT

■The transmission on belts and chain and the segmentable milling cutters make it perfect for garden works, offering the possibility to attach accessories such as plough, ditcher, potato plough, hoe, trailer, etc.

■Compact, well proportioned, with center of gravity above the milling cutters ensuring good maneuverability during work, stability and low vibration (no hopping)

■The oil filter, with 2 layers, prolongs the life of the engine and ensures optimum operation in harsh working conditions

■The duralumin transmission housing and the walking tractor’s weight of approx. 80 kg help at the land works (reduced user fatigue

when working with milling cutters)

■The plastic strap guards no longer vibrate while driving, reducing operating noise

■The handlebar can be adjusted vertically and horizontally and helps to adjust the horns according to the height of the user, respectively to leave no marks on the worked ground

■Equipped with 5.00‑8 agricultural profile wheels that provide better grip when used for transport compared to standard 4.00‑8 wheels.

■Equipped with a quick drain lever for fuel impurities that prevents clogging of the supply circuit and allows an easier start, ensuring easy maintenance

■The new starter design allows better engine cooling and prevents dust from entering the engine starting mechanism

■Adjustable accessory support, very useful when using the walking tractor when ploughing the soil, allows left‑right adjustment of the coulter and at the same time can give «plough tip».

■The low oil level sensor is a safety measure if the engine has lost the oil from the oil bath, automatically shutting down the machine.

■Resistant wings adjusted to be used for all jobs

■Front transport wheel

Benefits

■The segmentable milling cutters have an adjustable width when segmented and can be used for corn hoeing and vine hoeing.

■The milling cutters are equipped with knives designed for hard soils, are provided with side protection discs and a sleeve for protecting the drive shaft oil‑sealing rings.

Technical specifications

Engine ignition	Induction coil
Fuel capacity	3.6 l
Engine oil capacity	0.6 l
Fuel consumption	<395 g / kW / hour
Engine dimensions (LxWxH)	415x380x390 mm
Engine air filter	Prefilter and air filter, in oil, with 4 layers
Engine weight	17 kg
Number of engine cylinders	1 cylinder
Engine cooling	Air‑forced cooling
Engine lubrication system	Barbotage
Engine model	170F / RO170F
Engine type	4‑stroke, OHV, inclined 25°
Maximum engine power	7 HP
Maximum engine torque	12 Nm
Cubic capacity	212 cc
Diameter / Piston stroke	70 / 55 mm
Transmission type	Two transmission belts between motor and reducer, chain in oil reducer
Transmission oil type	15W40
Gears	2 forward, 1 reverse
Clutch	Tensioning drive belts
Power take‑off	No
Working width	560‑860 mm
Working depth	250 mm
Handlebar type	Adjustable up / down ‑ left / right
Milling cutter type	3 sections with 4 knives, segmentable
Wheel type	Rubber tires, 5.00‑8
Packed size (LxWxH)	820x375x780 mm
Weight	73 kg