■ Recommended for larger areas 5,000 sqm with hard, clay or sandy soil.

■ With segmentable milling cutters, it can be used both for spring works (unclogged) and for harvesting works (planting potatoes, hoeing corn, potatoes, vines, etc.).

■ Can be used with very good results also for transport (requires a trailer with a braking system and the slope should not exceed 20‑30 °).

■ Compact, well proportioned, with center of gravity above the milling cutters ensuring good maneuverability during work, stability and low vibration (no hopping).

■ The cast iron transmission housing and the walking tractor’s weight of approx. 140 kg (with mounted milling cutters) help at the work of the land (reduced user fatigue when working with milling cutters).

■ The handlebar can be adjusted vertically and horizontally and helps to adjust the horns according to the height of the user, respectively to leave no marks on the worked ground.

■ Equipped with 5.0‑12 agricultural profile wheels that provide better grip when used in transport also ensuring a higher speed.

■ The hexagonal tubes with bearing help to easily turn left‑right.

■ Transport system of milling cutters that helps to move the walking tractor on wheels to the work area with the milling cutters mounted on the transport support.

■ The low oil level sensor is a safety measure if the engine has lost the oil from the oil bath, automatically shutting down the machine.

■ The segmentable milling cutters (2 +1 + 1) for tillage have a suitable width when segmented and can be used for hoeing corn, potatoes and vine hoeing compared to other machines that do not allow this. It can also be used to prepare the land for crops: ploughing with reversible or simple plough, clearing with non‑segmented work cutters (maximum width 1,350 mm).

■ Equipped with a device for accessories, with depth adjustment rod.

■ Superior paint (red Ferrari), UV resistant (does not fade).

■ Gearbox adjusted for an ergonomic and fast gear change.

■ Equipped with hood and headlights to facilitate traffic at night.

■ Adjusted and vibration‑resistant wings due to the ribbing that allows the installation of metal wheels of 5.00‑12 for access to the fields of different crops, and can also be used with hoe (cultivator).

■ Comfort in use for several areas, including solariums and vine crops. Robust, suitable for any terrain.

■ Modem design, improved visibility for both the user and traffic participants, when combined with a trailer on public roads; safety stop in case of incident / accident.

■ It works when the clutch lever is actuated, located at the top, so that it can be more easily controlled by the user.

■ Oil overflow valve mounted on the drive to prevent damage to the oil‑sealing rings.

■ Equipped with power take‑off for additional accessories.

■ Tool box.

■ 2 x Rubber wheel 5.00‑12 / 40 cm

■ 1 x Set of two segmentable milling cutters 25‑30 cm, 32 mm, 2+2+1

■ 1 x Fixed support for accessories

■ 1 x Depth adjustment rod

■ 2 x Manicot (hexagonal tube) with satellite 032 mm, long. 280 mm