product code: 013494
Multi‑stage submersible pump 4STM6‑11,1.1KW, 6.6 m3/h, H 75m
Used for pumping clean water from wells and shafts (minimum 100 mm diameter) for home water supply, agriculture and drip irrigation, filling / emptying water tanks, increasing the clean water pressure for various applications
Recommended price: 830.00 RON
* Prices include VAT
-
Engine in oil bath, degree of protection IP 68 and multi‑stage pump (11 stages)
-
AISI304 stainless steel pump shaft, copper discharge connection
-
Separate housing for engine and pump stages
-
Turbine, diffuser and directional valve made of PPO material ‑ (technopolymer)
-
No return valve built into the pump
-
Ceramic stuffing gland protected against sand penetration with a rubber "o‑ring".
-
Control panel with starting capacitor, thermal protection, power cord and ON / OFF button
-
Non‑toxic and non‑polluting components, 1.5 "diameter discharge connection.
-
Relevant: The pump must not be submerged in water more than 30 meters (the distance from the water surface to the top of the pump must not exceed 30 meters) and the distance between the pump motor (bottom of the pump) and the bottom of the well must not be less than 5 meters! If the pump is lowered too close to the bottom of the well, during operation it draws the sand from the bottom of the well, sand that reaches the turbines blocking the pump.
Benefits
- Engine in oil bath and pressure compensating diaphragm
Technical specifications
| Flow | 6.6 m3/h |
| Discharge hole diameter | 11/2” / 38.1 mm |
| Maximum discharge height | 75 m |
| Maximum permissible temperature | 40° C |
| Insulation class | B |
| Degree of protection | IP 68 |
| Engine power | 1.1 kW |
| Supply voltage | 230V/50 Hz |
| Pump outer diameter | 4 |
| Pump length | 900 mm |
| Weight | 20 kg |
| Number of stages | 11 |
Delivery set
-
1 x Submersible pump
-
1 x Power cable (15 m)
-
1 x Control panel
-
1 x User manual
-
1 x Declaration of conformity
